Avaya X330W-2DS1, User Manual, Page: 82 / 176

Chapter 7 X330WAN CLI Commands
60 Avaya X330W-2DS1 User’s Guide
show snmp
Use the
show snmp
command to display SNMP information.
The syntax for this command is:
show snmp
Output Example:
X330WAN-2DS1-1(super)# show snmp
Authentication trap disabled
Community-Access Community-String
---------------- ----------------
read-only public
read-write public
trap public
---------------- ----------------
1.1.1.1 duplicate_ip
ip_vlan_violation
etc...
show startup-config
Use the
show startup-config
command to show the NVRAM based
configuration loaded automatically at startup.
The syntax for this command is:
show startup-config
show system
Use the
show system
command to display the up time, system name, location,
and contact person.
The syntax for this command is:
show system
Output Example:
X330WAN-2DS1-1(super)# show system
Uptime d,h:m:s
------------------------
0,2:40:55
System Name System Location System Contact