Avaya S8400, Installing And Configuring, Page: 41 / 80

Installing and Configuring the Avaya S8400 Media Server February 2007
41
Chapter 6: IP interface configuration
This chapter covers the following tasks:
●
Programming the SIPI for static addressing on page 42
●
Verifying connectivity to the media server on page 45
●
Verifying that the SIPI is translated on page 46
●
Upgrading the SIPI firmware version (if necessary) on page 46
●
Enabling control of the SIPI on page 46
●
Verifying the license status on page 46
You must program the TN8412AP Server IP Interface (SIPI) so that the system does not enter
No License Mode.
SIPI address configuration
The SIPI circuit pack usually uses static IP addressing only. See Programming the SIPI for static
addressing on page 42.