Avaya S8400, Installing And Configuring, Page: 25 / 80

Clearing the ARP cache on the laptop
Installing and Configuring the Avaya S8400 Media Server February 2007
25
Chapter 3: Communication Manager
installation
A new media server comes with a blank hard disk drive and a blank solid state disk (SSD). Use
the bootable software distribution CD-ROM to install the Linux operating system and Avaya
Communication Manager.
This chapter covers the following tasks:
●
Clearing the ARP cache on the laptop on page 25
●
Connecting the CD/DVD-ROM drive to the media server on page 26
●
Applying power to the media server on page 26
●
Accessing the media server on page 26
●
Configuring Telnet for Windows 2000 and Windows XP on page 27
●
Installing Avaya Communication Manager on page 27
●
Installing INTUITY AUDIX embedded messaging on page 28
Clearing the ARP cache on the laptop
Depending on the operating system of your Services laptop computer, you might need to clear
the Address Resolution Protocol (ARP) cache before you enter a new IP address. If you enter
an IP address and your computer cannot connect, perform the following procedure to clear the
cache.
1. On your computer, click Start > Run to open the Run dialog box.
2. Type
command
and press Enter to open an MS-DOS command line window.
3. Type
arp -d 192.11.13.6
and press Enter to clear the ARP cache in the laptop.
If the ARP cache does not contain the specified IP address, the message The specified
entry was not found appears. You can ignore this message.
4. Type exit and press Enter to close the command line window.