Chapter 7: Postinstallation administration
50
Installing and Configuring the Avaya S8400 Media Server
February 2007
Verifying the date and the time
Use SAT commands to verify the date and time.
1.Type
display time
and
press
Enter
.
2. Verify that the date and the time are correct.
3. In the Daylight Savings Rule field, verify that the correct rule number is displayed.
4. If the rule number is correct, you are finished with this task.
5. If the rule number is not correct, go to the Maintenance Web Interface.
6. Under Server, click
Server Date/Time
. Verify that the date and the time are correct. If not,
set the correct date and the correct time.
7. Repeat Steps 1 through 3.
Clearing and resolving alarms
1. On the Maintenance Web Interface, under Alarms, click
Current Alarms
.
You can resolve alarms on the
active
media server only.
2. Select the server alarms to clear and click
Clear
.
3. Using SAT commands or other standard troubleshooting procedures, to resolve any major
alarms.
display time
Page 1 of 1
DATE AND TIME
DATE
Day of the Week: Friday Month: June
Day of the Month: 9
Year: 2006
TIME
Hour: 14 Minute: 19 Second: 36 Type: Standard
Daylight Savings Rule: 0
WARNING: Changing the date or time may impact BCMS, CDR, SCHEDULED