Chapter 7: Postinstallation administration
52
Installing and Configuring the Avaya S8400 Media Server
February 2007
Enabling alarms to INADS by way of the SNMP module
Note:
Note:
Perform this procedure only if the installation includes a Secure Service Gateway
(SSG).
To enable alarms on the media servers:
1. Start an SSH session on the media server.
2. Type
almsnmpconf -d
ipaddress
-c
communityname
and press
Enter
, where
ipaddress
is the trap receiver address for the SSG device and
communityname
is the
community string name that the SSG device requires.
3. Type
almsnmpconf
and press
Enter
and verify that the correct information is entered.
4. Type
almenable -s y
and press
Enter
.
5. Type
almenable
and press
Enter
and verify that alarm origination is enabled on the
SNMP module. If used, also verify that alarm origination by way of a modem is still
enabled.
6. Log off.
Before leaving the site
●
Provide the default LAN security settings to the customer.
●
Ensure that the customer knows that remote access to the media server is available only if
the following services are enabled on the Maintenance Web Interface Firewall screen:
-
SSH
must be enabled
-
https
must be enabled to access the Maintenance Web Interface
-
def-sat
must be enabled to access the SAT commands
-
162/udp
must be enabled to receive SNMP traps from the UPS and the Avaya
Ethernet switch