Replacing an S8100 Media Server to upgrade its software from R9.5
Upgrade steps
Upgrade Job Aids for S8100
25
November 2003
37
BS
– After the shutdown finishes, restart
every application.
Execute
start all
.
38
BS
– Monitor the startup’s progress.
Execute
statapp
.
39
Verify that call processing comes into
service.
40
Verify that voice messaging comes into
service.
41
BS
– Telnet into the LAC window from the
bash.
Execute
telnet 127.1 and logon using lucent3
.
42
LAC
– Open a SAT window.
Type
multivantage
to open a SAT window. (The terminal
type is W2KTT.)
43
SAT
– Verify that there is no translation
corruption.
If there are corrupted translations, a message will appear
when the SAT window opens.
44
SAT
– Verify that no major or minor
alarms are present.
Run
display alarms
.
45
SAT
– Verify outgoing alarm reports link
to INADS.
Run
test inads-link
.
46
SAT
– Verify no-license/emergency
numbers.
Type
change system-parameters features
.
See ‘‘Administer No-License/Emergency Numbers’’
in
Installation and Upgrades for the Avaya S8100 Media Server with
the Avaya G600 and the Avaya CMC1 Media Gateways,
555-233-146.
47
SAT
– Save translations.
Run
save trans
.
48
SAT
– Logoff SAT and exit LAC.
a
Type
logoff
and respond with
y
to close the SAT
session.
b
Type
bash
to go to the bash shell.
49
BS
– Verify Intuity alarms.
Type
logsend -tTST
.
50
BS
– Verify GAM alarms.
Type
wrntevent GAM 0 9991
.
Note: This causes a Major GAM alarm. After the system has
called out, enter
cleargamalarm all
at the
BASH prompt
to retire the alarm. This alarm also generates a Maestro case
that the INADS group will need to close.
51
BS
– Close the bash windows.
a
Type
exit
to close the bash window.
b
Type
exit
to close the LAC window.
Step
Details