Avaya S8100 Series, Job Aids For Upgrading, Page: 17 / 26

Replacing an S8100 Media Server’s hard drive
Upgrade steps
Upgrade Job Aids for S8100 17
November 2003
26
BS
– Administer the customer’s parameters that
you wrote down in Step 15 , using the setip
command.
setip name=<args>
setip cust=<args>
setip dns=<args>
setip wins=<args>
setip ras=<args>
Replace each “<args>” with the corresponding parameter
you recorded in
Step 15 .
27 BS – Administer the product ID and OSS
parameters using the ‘productid’ and ‘oss’
commands.
productid multivantage-product-id <arg>
productid audix-product-id <arg>
oss <telno> <retries> <retry_interval>
Replace each “<arg>” with the corresponding parameter
you recorded from
Step 15 . For the
oss
command, enter
the
<telno>
,
<retries>
, and
<retry_interval>
parameters separated by spaces; do not enter commas.
28
BS
– Telnet into the LAC window from the
bash.
Execute
telnet 127.1
, and log in using
lucent3
.
29
LAC
– Install the new license and password file
from the LAC window using the lucent3 login
ID.
For details, see Chapter 3 in Installation and Upgrades
for the Avaya S8100 Media Server with the Avaya G600
and the Avaya CMC1 Media Gateways, 555-233-146.
30
LAC
– Exit the LAC window and bash shell. a Type
exit
, and close the telnet window.
b Type exit to close the bash window.
31 SDT – Open Internet Explorer on the S8100’s
desktop and log in.
a Double-click the IE icon on the S8100’s desktop.
b Click ‘Administer System’.
c Login using lucent3 .
d Click Continue on the Notice page.
32
SDT-IE
– Restore the translations and other
backed-up data to the hard drive.
Note: The Windows logins of vm , sa , browse ,
and NTadmin are reset to their factory defaults.
The customer should reset these passwords and
reinstall other Windows accounts they may have
created.
a Click ‘Administer System.’
b Click ‘Backup & Restore.’
c Click ‘Restore.’
d Select the Source for the restore – The
Destination or Other location you entered for the
backup in
Step 12 .
e Click the Continue button. Under “These items
will be restored from ... “, every item that was
backed up to the location specified in
Step d will
be selected.
f Click the Restore button.
Note: If you backed up AUDIX announcements in Step
12 , you must do two restores. After the first restore,
repeat the steps above using the location of the backed up
AUDIX announcements for the Source in
Step d .
33
SDT-IE
– Close Internet Explorer.
34
SDT
– Open a bash shell. Click
Start
→
Run
→
bash
.
Step Details