Avaya S8100 Series, Job Aids For Upgrading, Page: 24 / 26

Replacing an S8100 Media Server to upgrade its software from R9.5
Upgrade steps
24 Upgrade Job Aids for S8100
November 2003
27
BS
– Administer the customer’s parameters
that you wrote down in Step 6 , using the
setip command.
setip name=<args>
setip cust=<args>
setip dns=<args>
setip wins=<args>
setip ras=<args>
Replace each “<args>” with the corresponding parameter you
recorded in
Step 6 .
28 BS – Administer the product ID and OSS
parameters using the ‘productid’ and ‘oss’
commands.
productid multivantage-product-id <arg>
productid audix-product-id <arg>
oss <telno> <retries> <retry_interval>
Replace each “<arg>” with the corresponding parameter you
recorded from
Step 15 . For the
oss
command, enter the
<telno>
,
<retries>
, and
<retry_interval>
parameters
separated by spaces; do not enter commas.
29
BS
– Telnet into the LAC window from the
bash.
Execute
telnet 127.1
and login using
lucent3
.
30
LAC
– Install the new license and password
file from the LAC window using the
lucent3 login.
For details, see Chapter 3 in Installation and Upgrades for the
Avaya S8100 Media Server with the Avaya G600 and the
Avaya CMC1 Media Gateways, 555-233-146.
31
LAC
– Exit the LAC window and bash
shell.
a Type
exit
, and close the telnet window.
b Type exit to close the bash window.
32 SDT – Open Internet Explorer on the
S8100’s desktop and login.
a Double-click the IE icon on the S8100’s desktop.
b Click ‘Administer System’.
c Log in using lucent3 .
d Click Continue on the Notice page.
33
SDT-IE
– Restore the translations and other
backed-up data to the hard drive.
Note: The Windows logins of vm , sa ,
browse , and NTadmin are reset to their
factory defaults. The customer should reset
these passwords and reinstall other
Windows accounts they may have created.
a Click ‘Administer System.’
b Click ‘Backup & Restore.’
c Click ‘Restore.’
d Select the Source for the restore – The Destination or
Other location you entered for the backup in
Step 12 .
e Click the Continue button. Under “These items will
be restored from ... “, every item that was backed up to
the location specified in
Step d will be selected.
f Click the Restore button.
Note: If you backed up AUDIX announcements in Step 12 ,
you must do two restores. After the first restore, repeat the
steps above using the location of the backed up AUDIX
announcements for the Source in
Step d .
34
SDT-IE
– When the restore finishes, close
Internet Explorer.
35
SDT
– Open a bash shell. Click
Start
→
Run
→
bash
.
36
BS
– Shutdown every application. Execute
shutdown all
.
Step Details