Chapter 7
Cajun Campus CLI - Layer 3
Avaya P333R User’s Guide
205
Interface Mode
ip bootp-dhcp server Command
Use the
ip bootp-dhcp server
command to add a bootp/dhcp server to
handle bootp/dhcp requests received by this interface. The
no
form of this
command removes the server. A maximum of two servers can be added to a single
interface.
The syntax for this command is:
ip bootp-dhcp server
<ip-address>
Example:
To add station 192.168.37.46 as a bootp/dhcp server to handle bootp/dhcp requests
arriving at the interface “marketing”:
Router-N(config-if:marketing)# ip bootp-dhcp server
192.168.37.46
ip bootp-dhcp network Command
Use the
ip bootp-dhcp network
command to select the network from which
the bootp/dhcp server shall allocate an address. This command is required only
when there are multiple interfaces over the VLAN. The
no
form of this command
restores to the default.
The syntax for this command is:
[no] ip bootp-dhcp network
<ip-address>
Example:
To select the network 192.168.169.0 as the network from which an address shall be
allocated for bootp/dhcp requests:
Router-N(config-if:marketing)# ip bootp-dhcp network
192.168.169.0
ip-address
The IP address of the server.
ip-address
The IP address of the network.
Summary of Contents for P333R
