Avaya P333R, User Manual

Page: 229 / 270

Chapter 7 Cajun Campus CLI - Layer 3
Avaya P333R User’s Guide 209
ip access-list Command
Use the
ip access-list
command to create a specific policy rule. This
command defines a policy rule. The access list contains several of these rules. Each
rule pertains to the source IP address, the destination IP address, the protocol, the
protocol ports (if relevant), and to the ACK bit (if relevant).
The syntax for this command is:
[no] ip access-list <access-list-number> <access-list-index>
<command> <protocol> {<source-ip>
<source-wildcard> | any |host
<source-ip>}[<operator> <port> [<port]]
{<destination-ip> <destination-
wildcard>|any |host
<destination-ip>}[<operator> <port>
[<port>]][established] [precedence]
Example:
Router-N>ip access-list 101 23 deny ip any
1.2.0.0 0.0.255.255
To delete a specific rule, use the
no
form of this command.
<access-list-number>
integer (100..199)
<access-list-index>
integer (1...9999)
<command>
permit | deny | deny-and-notify | fwd0-7
<protocol>
ip | tcp | udp | integer (1..255)
<source-ip>
ip network
<source-wildcard>
ip network wildcard
<operator>
eq | lt | gt | range
<port>
integer (1..65535)
<destination-ip>
ip network
<destination-wildcard>
ip network wildcard
<precedence>
mandatory | optional]