Avaya P333R, User Manual

Page: 175 / 270

Chapter 7 Cajun Campus CLI - Layer 3
Avaya P333R User’s Guide 155
Example:
Router-N> log 20
event show Command
The
event show
command display the event status.
The syntax for this command is:
event show
reset Command
The
reset
command resets the P333R module. This command resets only the
specific module. If the module is the master of the stack the entire stack is reset.
If you want to keep changes you made to the current running configuration use the
copy running-config startup-config
command first.
The syntax for this command is:
reset
ping Command
Use the
ping
command to check host reachability and network connectivity.
The syntax for this command is:
ping <host> [<interval>]
Output Example:
Router-N> ping 10.1.1.1
Reply from 10.1.1.1: bytes=50 time=150ms TTL=64
Reply from 10.1.1.1: bytes=50 time=133ms TTL=64
Reply from 10.1.1.1: bytes=50 time=283ms TTL=64
Ping statistics for 10.1.1.1:
Packets: sent = 3, Received = 3, Lost = 0 (0% loss)
Approximate round trip times in milli-seconds:
Minimum = 133, Maximum = 283, Average = 141
host
IP address of the target system.
interval
An integer, the number of seconds between
successive ping messages. The default is 1 second.