Avaya P333R, User Manual

Page: 75 / 270

Chapter 5 CLI – Layer 2
Avaya
P333T-PWR User’s Guide
55
show port self-loop-discovery
Use the s
how port self-loop-discovery
command to display which port or
switch has an enabled IBM™ token ring cable loop discovery status.
Note: This command is not supported by the P330-ML switches.
Note: If this command is to be implemented on a stack with P330-ML as the stack
master, a session should be opened to the relevant switch.
The syntax for this command is:
show port self-loop-discovery [module num/port number]
Output Example:
P330-N> show port self-loop-discovery 1/5
Self-Loop-Discovery is enabled on port 1/5.
show internal buffering
The
show internal buffering
command displays the size options (Maximum,
Minimum, or Medium) of the Receive (Rx) buffer allocated to each port of the
specified switch.
The syntax for this command is:
show internal buffering [<mod_num>]
Output Example:
P330-N> show internal buffering 1
Module Internal Buffer
------ ---------------
1 med
Note: Internal buffering for the P330-ML switches will always have the value
Not
supported
. This command is used to display the internal buffering status for the
other P330 switches in the stack.