
H323 Telephone Installation
Page 33
Issue 23e (Friday, February 15, 2019)
IP Office™ Platform 11.0
Comments on this document? [email protected]
Installation: System H.323 Support
2.2.4 Adjusting DiffServ QoS
DiffServ is used to apply different 'quality of service' tags to the voice (RTP) and control signal (RTCP) elements of a VoIP
call. The IP Office system itself does not apply any different priority to data packets its receives or sends based on their
tags. However, when being used in a network where QoS is being used for prioritization by other devices, the IP Office's
settings should be set to match those expected for voice calls and their associated control signalling.
To adjust the DiffServ QoS settings:
1. Using IP Office Manager, retrieve the configuration from the system.
2. Select
System
.
3. Select the
LAN1
or
LAN2
tab depending on which of the system's LAN interfaces you want to use to support
H.323 extensions.
4. Select the
VoIP
sub-tab.
5. Check the
DiffServ Settings
that are being used by the system. Note that the 2 rows are linked, the upper row
shows the DiffServ values in Hex numbers, the lower row shows the values in decimal. The hex values are equal
to the decimal multiplied by 4. Either row can be used to set the required values.
6. If these settings need to be changed, do so and then save the configuration back to the system.