manualshive.com logo in svg

Avaya IP403 Office, Installation Manual, Page: 69 / 115

Share
Download
Avaya IP403 Office Installation Manual Download Page 69

Basic System Programming 

Installation Manual 

Page 63 

IP Office 2.1 

40DHB0002USCL Issue 10c (11th May 2004) 

Upgrading an IP403 to Software Level 2.1 

IP403 systems with Level 1.4 or earlier core software cannot be directly upgraded to Level 2.1 core 
software. They must be upgraded as follows:  

1.  Upgrade to Level 1.99 using the ip403.bin file found in the Manager application's IP403V1_99 

folder.  

2. Upgrade from Level 1.99 to Level 2.

1

 using the ip403.bin file found in the Manager application's 

IP403V2_

1

 folder.  

 

Within the IP Office Upgrade Wizard, to switch between the core software .bin files in different folders, 
use the following: 

1.  Right-click on the Upgrade Wizard screen.  

2. Select 

Select Directory

 and browse to the folder containing the required core software .bin file.  

3. Click 

OK

.  

4.  The details in the 

Available

 software column should change.  

 

  

Summary of Contents for IP403 Office




















































































































Reviews:

No comments