Adding or Removing Hardware
Add IP Solutions
262
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
Administration Steps
1
Log in as craft.
2
Type change circuit-pack and press Enter.
3
Check the Code column to see if the slots above the TN802B say DSMAPD or MEDPRO.
.
4
If MEDPRO, go to the entry just above the TN802B that says MEDPRO.
5
Type DSMAPD, and press Enter. Changing the one entry automatically changes the entry above
it. If it is in IP Trunk mode, you get the following error message:
MedPro type requires TN802 with application. Type MEDPRO on circuit-packs
form.
Log onto the TN802B Interface Server
If administered remotely through pcANYWHERE:
1
Dial in to the server through pcANYWHERE using the dialup number supplied.
2
Click on the pcANYWHERE Remote Host Computer button on the toolbar to send CTRL ALT
DEL to the host.
3
Type administrator in the
User Name
field.
4
Type iptrunk in the
Password
field and click OK.
5
After logging on for the first time, change the administrator password and, if desired, the user
name, to ensure security. See your Windows NT server documentation for details.
If administered locally on a monitor, keyboard, and mouse:
1
Press CTRL, ALT, and DEL simultaneously.
2
Type administrator in the
User Name
field.
3
Type iptrunk in the
Password
field and click OK.
4
After logging on for the first time, change the administrator password and, if desired, the user
name, to ensure security. See your Windows NT server documentation for details.
change circuit-packs Page 1 of 5
CIRCUIT PACKS
Cabinet: 1 Carrier: A
Carrier Type: processor
Slot Code Sf Mode Name Slot Code Sf Mode Name
11:
DSMAPD RESERVED-IP
01: TN754
DIGITAL LINE
12:
DSMAPD
RESERVED-IP
02: TN758
POOLED MODEM
13:
TN802 B
MAPD BOARD
03: TN2144
ANALOG LINE
14:
04: TN746 B
ANALOG LINE
15:
05
16:
06: TN771 C
MAINTENANCE/TEST
07: TN464 F
DS1 INTERFACE
08: TN2140
E&M TIE TRUNK
09: TN767 E
DS1 INTERFACE
10: TN799 B
CONTROL-LAN
’#’ indicates circuit pack conflict.
