Adding or Removing Hardware
Add IP Solutions
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
261
June 2004
NOTE:
To properly seat the circuit pack, push firmly on the front of the faceplate until the latch
reaches the bottom rail of the carrier. Then close the latch until it is fully engaged.
1
Insert the TN802B IP Interface into the rightmost of the three slots you reserved for it (see
Figure
100
).
When you plug in the TN802B IP Interface, the circuit pack starts to boot and the LCD reads PC
Boot then after about 3 to 4 minutes it changes to IP TRK *, the default mode.
Figure 100: J58890MA-1 L30 IP Interface Assembly
Test the Modem
1
Check for dial tone.
2
Contact Avaya Customer Support and ask a representative to dial into your IP Interface server.
Administer the IP Interface
Administration is done either locally or remotely. If administered locally, proceed with the following
administration steps on the attached keyboard, mouse, and monitor. If administered remotely, call your
service representative to start the process.
4
5
6
7
8
9
10
11
12
13
14
15
16
indfmapd KLC 031299
