Adding or Removing Hardware
Add Integrated Announcements/TN2501AP
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
221
June 2004
To establish LAN connections the TN2501AP circuit pack requires a
•
Backplane Adapter
that attaches to the Amphenol connector on the back of the cabinet,
corresponding to the TN2501AP integrated announcement circuit pack slot.
•
LAN cable
that attaches to the Backplane Adapter.
Backplane Adapter
Figure 85
shows the Backplane Adapter.
Figure 85: Backplane Adapter (Comcode 848525887)
LAN cable
The TN2501AP circuit pack does not include cables to connect the circuit pack to your LAN. The
following table lists the cable category and connection port.
Figure notes
1
Amphenol connector attaches to
the back of the switch cabinet,
corresponding to the TN2501AP
circuit pack slot.
2
RJ-45 LAN cable connection
•
10 Mbps uses Category 3 cable.
•
100 Mbps uses Category 5 cable.
3
This connector is not used for VAL.
Ethernet connection speed
Cable
Connection description
10 Mbps
Category 3
Connects through the RJ45 jack
(note #2 in
Figure 85
),
100 Mbps
Category 5
Connects through the RJ45 jack
(note #2 in
Figure 85
),
addfipm2 KLC 083000
1
2
3
