Installing and Cabling the Cabinets
Unpack and Inspect
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
25
June 2004
3
Before mounting the cabinets, remove the cabinet doors by opening them and lifting them straight
up and off of the hinge pins.
Figure 1: Equipment Packed with the Compact Modular Cabinet
Figure notes
1
Left panel (also acts as a wall-mount template
and as a floor mount pedestal)
2
Compact modular cabinet
3
Right panel
4
U.S. Robotics external modem (not shipped
with all systems)
5
#12 x 1-inch shoulder screws
6
Processor interface cable (not shipped with
all cabinets)
7
AC power cord (NEMA 5-15P or IEC
320)
8
Vertical TDM/LAN bus cable (not
shipped with all systems)
9
Horizontal TDM/LAN bus cable (not
shipped with all systems)
10
14-in. (35.5 cm) 6 AWG (#40)
(16 mm
2
) ground wire
11
Single-point ground block
qrdmpart KLC 011598
6
7
4
8
9
10
11
5
3
2
1