Avaya C360 Manager, Installation And Configuration Manual

Page: 173 / 248

RIP (Routing Interchange Protocol) Configuration
Issue 2 July 2005 173
RIP2
RIP2 overcomes some of the shortcomings of RIP. The table below summarizes the differences
between RIP and RIP2.
RIP CLI Commands
Table 34: DIfferences Between RIP and RIP2
RIP2 RIP
Multicast addressing Broadcast Addressing
Event-driven Timer-based (update every 30 seconds)
VLSM support (subnet information transmitted) Fixed subnet masks
In order to... Use the following command...
Configure the Routing
Information Protocol (RIP) router rip
Specify a list of networks on
which the RIP is running network
Redistribute routing information
from other protocols into RIP redistribute
Specify the RIP version running
on the interface basis ip rip rip-version
Set the interface RIP route
metric value default-metric
Set the RIP Send and Receive
mode on an interface ip rip send-receive
Enable learning of the default
route received by the RIP ip rip default-route-mode
Enable split-horizon with
poison-reverse on an interface ip rip poison-reverse
Enable split-horizon mechanism ip rip split-horizon
1 of 2