Avaya BCM450 Rls 6.0 Task Based Manual Download

Page: 95 / 100

BCM450 Hardware & Installation

NN40011-001 Issue 1.2 BCM450 Rls 6.0

4. Click

Open

5. The new keycode file will be applied to the BCM, allowing the software

upgrade to be performed.

Performing the Upgrade

You may receive your upgrade files on DVD or in zip format. If your files are in
zip format, ensure they are extracted to an accessible location before
proceeding with the upgrade.

Note:

If the keycode containing the relevant upgrade entitlement has not been

applied to the BCM, you will not be able to perform the upgrade.

Note:

The upgrade process can take up to 30 minutes, during which some or

all of the BCM services will be unavailable.

Note:

Do not interrupt or power down the BCM during the upgrade process,

as this could cause catastrophic failure to the BCM.

Use the following procedure to apply the upgrade files to the BCM.

1. In the Element Manager

Administration

tab, open the

Software

Management

folder and select

Software Updates

Summary of Contents for BCM450 Rls 6.0





































































































Search results

Summary of Contents for BCM450 Rls 6.0

Reviews:

Related manuals for BCM450 Rls 6.0

Brands by name

Popular brands

Avaya BCM450 Rls 6.0, Task Based Manual

Search results

Summary of Contents for BCM450 Rls 6.0

Reviews:

Related manuals for BCM450 Rls 6.0

Brands by name

Popular brands