Avaya BCM450 Rls 6.0 Task Based Manual Download

Page: 35 / 100

BCM450 Hardware & Installation

NN40011-001 Issue 1.2 BCM450 Rls 6.0

Installing a BCM450 Expansion Unit

Adding a BCM450 Expansion Unit increases the capacity of the BCM450
system by providing a method of adding additional media bay modules
(MBM). Each MBM added, increases the number of trunks or extensions that
you can connect to the BCM450 system.



The BCM450 can be connected to a maximum of 1 Expansion Unit.



Each Expansion Unit can support 6 Media Bay Module modules.



The expansion unit must be attached to the BCM450 by means of a 5

meter DS256 cable that is supplied with the expansion unit.

Note:

A keycode is required to enable the expansion unit.

To connect the BCM450 expansion unit to the main unit:

1. Plug one end of the supplied DS256 cable in the DS256 connector on

the expansion unit.

2. Plug the other end of the cable into the DS256 connector on the

faceplate of the MSC in the BCM450 main unit.

Summary of Contents for BCM450 Rls 6.0





































































































Search results

Summary of Contents for BCM450 Rls 6.0

Reviews:

Related manuals for BCM450 Rls 6.0

Brands by name

Popular brands

Avaya BCM450 Rls 6.0, Task Based Manual

Search results

Summary of Contents for BCM450 Rls 6.0

Reviews:

Related manuals for BCM450 Rls 6.0

Brands by name

Popular brands