Avaya AP-3 User Manual Download Page 77

Page: 77 / 425

Download the Latest Software

2-46 Avaya Wireless AP-3 User’s Guide

After the TFTP server is installed:

•

Check to see that TFTP is configured to point to the directory

containing the AP Image.

•

Make sure you have the proper TFTP server IP address, the proper

AP Image file name, and that the TFTP server is operational.

• Make sure the TFTP server is configured to both Transmit and

Receive files, with no automatic shutdown or time-out.

Download Updates from your TFTP Server using the Web
Interface

1. Download the latest software from

http://www.avaya.com/support

2. Copy the latest software updates to your TFTP server.

3. In the Web Interface, click the

Commands

button and select the

Download

tab.

4. Enter the IP address of your TFTP server in the field provided.

5. Enter the

File Name

(including the file extension). Enter the full

directory path and file name. If the file is located in the default
TFTP directory, you need enter only the file name.

6. Select the

File Type

from the drop-down menu (use

Img

for

software updates).

7. Select

Download & Reboot

from the

File Operation

drop-down

menu.

8. Click

Summary of Contents for AP-3










































































































































































































































































































































































































































Search results

Summary of Contents for AP-3

Reviews:

Related manuals for AP-3

Brands by name

Popular brands

Avaya AP-3, User Manual

Search results

Summary of Contents for AP-3

Reviews:

Related manuals for AP-3

Brands by name

Popular brands