manualshive.com logo in svg

Avaya AP-3, User Manual

Share
Download
Avaya AP-3 User Manual Download Page 278

Recovery Procedures

Avaya Wireless AP-3 User’s Guide                                                                                 7-23

Preparing to Download the AP Image

Before starting, you need to know the Access Point’s IP address, subnet 
mask, the TFTP Server IP Address, and the AP Image file name. Make 
sure the TFTP server is running and configured to point to the folder 
containing the image to be downloaded.

Download Procedure

1. Download the latest software from 

http://www.avaya.com/support

.

2. Copy the latest software updates to your TFTP server’s default 

directory.

3. Use a straight-through serial cable to connect the Access Point’s 

serial port to your computer’s serial port.

NOTE:

You must remove the Access Point’s cable cover and front cover to 
access the serial port.

Summary of Contents for AP-3










































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands