manualshive.com logo in svg

Avaya AP-3, User Manual, Page: 4 / 425

Share
Download
Avaya AP-3 User Manual Download Page 4

How to Get Help

How to Get Help

For additional support telephone numbers, go to the Avaya support Web 
site: 

http://www.avaya.com/support

. If you are:

•  

Within the United States, click the 

Escalation Management

 link. 

Then click the appropriate link for the type of support you need.

•  

Outside the United States, click the 

Escalation Management

 link

. 

Then click the 

International Services

 link that includes telephone 

numbers for the international Centers of Excellence.

TCP/IP Facilities

Customers may experience differences in product performance, reliability 
and security depending upon network configurations/design and 
topologies, even when the product performs as warranted.

To order copies of this and other documents:

For the most current versions of documentation, go to the Avaya support 
Web site: 

http://www.avaya.com/support

.

Summary of Contents for AP-3










































































































































































































































































































































































































































Reviews:

No comments