manualshive.com logo in svg

Avaya AP-3, User Manual, Page: 71 / 425

Share
Download
Avaya AP-3 User Manual Download Page 71

Initialization

2-40                                                                                  Avaya Wireless AP-3 User’s Guide

— The following options are available for an 

802.11b/g AP

:

Option

Description

Operational Mode

An 802.11b/g wireless interface can 
be configured to operate in the 
following modes:

•  

802.11b mode only

•  

802.11g mode only

•  

802.11g-wifi mode

•  

802.11bg mode (default)

Network Name 
(SSID)

Enter a Network Name (between 1 
and 32 characters long) for the 
wireless network. You must configure 
each wireless client to use this name 
as well.

Auto Channel Select

By default, the AP scans the area for 
other Access Points and selects the 
best available communication 
channel, either a free channel (if 
available) or the channel with the 
least amount of interference. 
Remove the check mark to disable 
this option.

Summary of Contents for AP-3










































































































































































































































































































































































































































Reviews:

No comments