manualshive.com logo in svg

Avaya 7406E, Installation And Configuration Manual

The Avaya 7406E, a cutting-edge communication device, comes with a comprehensive User Manual that offers detailed instructions and insights on its functionalities. Discover all the features and settings of this advanced product when you download the manual for free from manualshive.com, enabling optimal utilization of your Avaya 7406E.

Share
Download
background image

57

Avaya 7406E Digital Mobile Handset Installation and Configuration Guide

Appendix C

Button mapping

You can map the feature buttons on your set after configuring your handset.

The handsets have six feature buttons. These buttons can be programmed by your system 
administrator. You can also program the buttons from your handset. The following section 
describes the usual mapping of the buttons, based on the M7310 telephone button mapping. The 
illustration below shows examples of the default button mapping for the handset.

Figure 16   

Avaya 7406E Digital Mobile Handset

The following three illustrations show the correlation between the Avaya 7406E Digital Mobile 
Handset buttons and the M7310, Avaya 7316 Digital Mobile Handset and Avaya 7316E Digital 
Mobile Handset, which are standard telephones used for Avaya Norstar and Avaya Business 
Communications Manager systems (Avaya BCM).

Line 1

Line 2

Call Fwd

Last No.

Voice Call

Intercom

Summary of Contents for 7406E





























































Reviews:

No comments

Related manuals for 7406E

Samsung SMT-i6010 Self Help Manual preview
SMT-i6010
Brand: Samsung Pages: 2
Samsung SMT-i5343 Quick User Manual preview
SMT-i5343
Brand: Samsung Pages: 3
CEECO SSP-560-F Service Manual preview
SSP-560-F
Brand: CEECO Pages: 12
Uniden DECT 1730 Series Owner'S Manual preview
DECT 1730 Series
Brand: Uniden Pages: 32
Yealink T42S-Skype for Business Quick Start Manual preview
T42S-Skype for Business
Brand: Yealink Pages: 8
MagicBox Colombo User Manual preview
Colombo
Brand: MagicBox Pages: 44
Gigaset C610A IP Manual preview
C610A IP
Brand: Gigaset Pages: 28
Channel Plus H611 Install Manual preview
H611
Brand: Channel Plus Pages: 2
GE 29115AE1 User Manual preview
29115AE1
Brand: GE Pages: 97
GAI-Tronics 276S Manual preview
276S
Brand: GAI-Tronics Pages: 8
Wheelock UTA-WH Installation Instructions Manual preview
UTA-WH
Brand: Wheelock Pages: 6
Yada yd-v16 User Manual preview
yd-v16
Brand: Yada Pages: 14
Hall Technologies HT-ATLAS User Manual preview
HT-ATLAS
Brand: Hall Technologies Pages: 30
AEG Voxtel D200 Quick Start Manual preview
Voxtel D200
Brand: AEG Pages: 176
AEG Voxtel D135 User Manual preview
Voxtel D135
Brand: AEG Pages: 48
AEG Voxtel D555 twin Quick User Manual preview
Voxtel D555 twin
Brand: AEG Pages: 120
AEG Voxtel M310 User Manual preview
Voxtel M310
Brand: AEG Pages: 124
AEG Voxtel S100 Quick Start Manual preview
Voxtel S100
Brand: AEG Pages: 198

Brands by name

Popular brands

Load more brands