Avaya 7406E, Installation And Configuration Manual

Page: 32 / 60

32 Chapter 2 Introduction
NN40110-301 NN40110-301
Additional components
Along with this guide, the following items are included with the Avaya 7406E Digital Mobile
Handset.
Figure 7 Handset components
Figure 8 System parts
Battery charge controller
The Avaya 7406E Digital Mobile Handset incorporates a special handset battery charge controller
that uses a four-stage charging program. The four-stage charging program sequences charging
from a soft start to a fast charge, and then to a topping charge, followed by a maintenance charge.
This four-stage charge sequence presents an optimum-charging plan that helps maximize the
overall life of the battery by managing two critical elements in the battery charging process: charge
rate and overcharging protection. NiMh batteries do not exhibit memory problems. You do not
need to drain the batteries before you recharge them.
Low battery status is indicated on the handset by the visual charge status on the display and the
audible warning tone. The battery icon appears in the upper right-hand corner of the handset
display. When the battery is low, the battery icon flashes. If the handset is in use and the battery is
low, the battery icon flashes and a warning tone beeps every 15 seconds. If the phone is in standby
mode, low battery status is not indicated.
Handset Handset charging Battery pack
AC adapter
Belt clip
cradle
External battery
charger
Mounting bracket
Base station and mounting bracket AC adapter
Telephone cord
ToPC Upgrade
-
+
Upgrade bridge controller