manualshive.com logo in svg

Avaya 7406E, Installation And Configuration Manual

The Avaya 7406E, a cutting-edge communication device, comes with a comprehensive User Manual that offers detailed instructions and insights on its functionalities. Discover all the features and settings of this advanced product when you download the manual for free from manualshive.com, enabling optimal utilization of your Avaya 7406E.

Share
Download
background image

Chapter 1 New in this release

13

Avaya 7406E Digital Mobile Handset Installation and Configuration Guide

Antenna diversity

The base station and each handset are equipped with two antennas. Dual antennas ensure better 
reception by minimizing multipath fading effects. The base station antennas pivot to allow you to 
position them in the most optimum direction. Adjust the antenna for optimal transmission by 
moving it through 90-degree-angle planes (for example, perpendicular to the wall, parallel to the 
wall, perpendicular to the floor, parallel to the floor).

USB to UART bridge controller

You can upgrade the Avaya 7406E Digital Mobile Handset firmware when new versions become 
available. Use the USB to UART bridge controller, along with the FlashLoader program, to 
upgrade the firmware. For more information on how to upgrade your Avaya 7406E Digital Mobile 
Handset system, refer to 

Chapter 6, “Upgrading the firmware,” on page 49

Summary of Contents for 7406E





























































Reviews:

No comments

Related manuals for 7406E

Aastra Clearspan 6731i Quick Reference preview
Clearspan 6731i
Brand: Aastra Pages: 5
Aastra 9143i Series Basic Instructions preview
9143i Series
Brand: Aastra Pages: 4
Aastra 6867i Quick Start Manual preview
6867i
Brand: Aastra Pages: 2
Aastra Venture IP Telephone System System Manual preview
Venture IP Telephone System
Brand: Aastra Pages: 24
Aastra Venture IP Telephone System Options Manual preview
Venture IP Telephone System
Brand: Aastra Pages: 43
Aastra VentureIP 480i Specifications preview
VentureIP 480i
Brand: Aastra Pages: 2
Aastra MBU 400 User Manual preview
MBU 400
Brand: Aastra Pages: 72
Yealink T46 Quick User Manual preview
T46
Brand: Yealink Pages: 4
Yealink CP930W Telesystem Quick Start Manual preview
CP930W Telesystem
Brand: Yealink Pages: 12
Yamaha YVC-200 User Manual preview
YVC-200
Brand: Yamaha Pages: 23
Panasonic KX-TGD890C Operating Instructions Manual preview
KX-TGD890C
Brand: Panasonic Pages: 72
Telos VSet1 Installation Instructions preview
VSet1
Brand: Telos Pages: 2
Main Resource Axxess Series Instructions preview
Axxess Series
Brand: Main Resource Pages: 5
GreatCall Jitterbug Smart2 Getting Started preview
Jitterbug Smart2
Brand: GreatCall Pages: 21
Panasonic KX-TG2511CX Specifications preview
KX-TG2511CX
Brand: Panasonic Pages: 2
Panasonic KX-TG2501 Getting Started Manual preview
KX-TG2501
Brand: Panasonic Pages: 2
Panasonic KX-TG2503NZF Operating Instructions Manual preview
KX-TG2503NZF
Brand: Panasonic Pages: 8
Panasonic KX-TG2503CF Operating Instructions Manual preview
KX-TG2503CF
Brand: Panasonic Pages: 8

Brands by name

Popular brands

Load more brands