manualshive.com logo in svg

Avaya 3616 Series, Installation Manual

Share
Download
Avaya 3616 Series Installation Manual Download Page 65

Miscellaneous 

3600 Series IP Phone Installation 

Page 65 

IP Office 4.0 

15-601082 Issue 05a (22nd May 2007) 

trying to make contact for 20 seconds during which the message may clear itself if contact is 
established.  

• 

No SVP Server

  

The phone cannot locate the AVPP. Action: Check the address configured in the phone is using 
static addressing. Check the AVPP.  

• 

No SVP Server / No DNS Entry

  

The phone cannot perform DNS lookup of the AVPP. Action: Verify that a proper address has 
been entered for the AVPP on the DNS sever.  

• 

No SVP / No DNS IP

  

The phone cannot perform DNS lookup of the AVPP as it has no IP address for the DNS server. 
Action: Check the operation of the DHCP server.  

• 

No SW Found

  

A required software component has not be found. Action: Check that the phone license type has 
a corresponding entry in the sink_cfg.cfg file on the TFTP server and that the files list are present 
on the TFTP server.   

• 

Not Installed!

  

A required software component is missing. Action:

 

Check that all required software files are on 

the TFTP server, if over-the-air downloading is being used. If the error repeats, contact Avaya 
Technical Support. 

• 

Password Error

  

The phone is not encrypting the challenge string correctly. This indicates that the password set in 
the phone disagrees with the password administered in IP Office. Action:

 

Enter the correct 

password in the phone. 

• 

Press END

  

Your call has ended. Action:

 

To return to standby mode, press 

Power Off/End Call

.  

• 

Restarting...

 

The wireless phone is in the process of rebooting. There will be a 20 second delay in an attempt 
to let potential network/system errors clear. Action:

 

None. 

• 

Retry/Restart

  

The wireless phone is waiting for user input, prior to retrying the registration process or restarting 
after a delay. Action:

 

See Avaya IP Office Integration Factors. 

• 

Select License

  

The correct protocol has not been selected from the license set. Action:

 

Using the administrative 

menus, select one license from the set to allow the phone to download the appropriate software. 

• 

Server Busy

  

The wireless phone is attempting to download from a TFTP server that is busy downloading other 
devices and refusing additional downloads. Action:

 

None, the wireless phone will automatically 

retry the download every few seconds. 

• 

Service Unavailable / Restarting...

  

An error has caused the handset to lose the call. It is now attempting to restart and return to 
standby. Action: This occurs when Restart on Error operation has been selected.  

• 

Storing Config

 

The phone is in the process of storing changes to its configuration.  

• 

SVP Service Rej.

  

The AVPP has rejected a request from the phone. Action: The phone will restart and attempt to 
re-register with the AVPP.   

• 

System Busy

  

AVPP is busy or out of resources. The IP address of the AVPP is also shown. Action:

 

All call 

paths are in use, try calling again in a few minutes. 

Summary of Contents for 3616 Series













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands