manualshive.com logo in svg

Avaya 3616 Series, Installation Manual

Share
Download
Avaya 3616 Series Installation Manual Download Page 29

2. AVPP Installation and Configuration 

3600 Series IP Phone Installation 

Page 29 

IP Office 4.0 

15-601082 Issue 05a (22nd May 2007) 

Network Configuration 

The IP address and other network settings are established via the 

Network Configuration

 screen. This 

is also where you may optionally establish a hostname and enter the IP address of the location of any 
software updates. 

For more information about installing software updates via TFTP, see Software Maintenance. 

1.  From the main menu, scroll to 

Network Configuration

 and press 

Enter

. A screen similar to the 

following is displayed: 

 

• 

IP Address

  

Enter the IP address of the AVPP, defined by your system administrator.  

• 

Hostname 

(optional)  

Change the default host name, if desired. This is the name of the AVPP to which you are 
connected, for identification purposes only. You cannot enter any spaces in this field. 

• 

SVP-II TFTP Download Master

  

This entry indicates the source of software updates for the AVPP. Valid source locations are: 

• 

NONE

 - disables. 

• 

IP Address

 - the IP address of the network TFTP server that will be used to transfer 

software updates to the AVPP. 

• 

DNS Server

 and 

DNS Domain

  

These settings are used to configure domain name services. Consult your system administrator 
for the correct settings. These can also be set to 

DHCP

. This will cause the DHCP client in the 

AVPP to attempt to automatically get the correct setting from the DHCP server. The DHCP 
setting is only valid when the IP address is also acquired using DHCP. 

• 

WINS servers

  

These settings are used for Windows Name Services. Consult your system administrator for the 
correct settings. These can also be set to 

DHCP

. This will cause the DHCP client in the AVPP to 

attempt to automatically get the correct setting from the DHCP server. The DHCP setting is only 
valid when the IP address is also acquired using DHCP.  

• 

When the name services are set up correctly, the AVPP can translate hostnames to IP 
addresses. Using Telnet, it is also possible to access the AVPP using its hostname 
instead of the IP address.

 

• 

Workgroup

   

As set in WINS. 

• 

Syslog Server

  

Logging can be set to 

Syslog

 or 

NONE

. If Syslog is set, a message is sent to the Syslog server 

when an alarm is triggered. 

• 

Disable Telnet service

  

Prevents Telnet access into the AVPP server. Reset the AVPP server for the change to take 
effect. Upon reset the Telnet protocol server is not started. 

The AVPP must be reset in order to set the configuration options. If the AVPP is in 

Maintenance Lock 

and you press 

Esc

, you will be prompted to reset the AVPP. At the reset prompt, press 

Y

 (Yes). 

To manually reset AVPP, select 

Reset

 in the 

SVP-II Configuration 

screen and then press 

Y

 (Yes).  

Summary of Contents for 3616 Series













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands