3600 Series Wireless IP Phone Installation
3600 Series IP Phone Installation
Page 40
IP Office 4.0
15-601082 Issue 05a (22nd May 2007)
3.4 Phone Registration
3.4a 3616, 3620 and 3626 Phones
1. Do not perform this process until the preceding checks have been completed:
2. Set the phone into administration mode:
1. With the phone powered off, simultaneously press and hold the
Start Call
and
End Call
buttons.
2. After hearing two beeps, release the
Start Call
button, then release the
End Call
button.
3. If an administration password has been set, it must be entered to display the Admin
menu. If no password is set, the Admin menu is displayed.
4. To scroll through the menu options, press
Up
,
Down
and
Select
.
5. To change the selected option, press
OK
or press
Up
to return to the previous menu
level.
3. Select
Network Config
.
1. The default mode for IP address operation is DHCP. The following is only required if the
phone needs to be switched to static IP address operation:
1. Select
IP Address
and then
Static IP
.
2. Set the
IP Address
,
TFTP Server IP
,
Default Gateway
and
Subnet Mask
information as required.
3. Set the
Call Server IP
to the LAN address of the IP Office.
4. Set the
Call Server Port
to
1719
.
5. Set the
AVPP IP
address.
2. Select
ESSID
. If you are accepting broadcast
SSID
's at your access points, the handset
will automatically learn the ESSID information when powering on. If there are multiple
wireless networks in range, it will be necessary to enter the SSID of the wireless network
that the phone should use.
3. Select
Security
. Enter the wireless security settings that match those configured for the
wireless network.
4. Select
Phone Config
.
1. Select
License Option
. The phones needs to be configured with a telephony protocol
number which then ensures the handset checks for the proper software files each time it
powers on. Set the value to
009
.
1. To change the displayed number, press
Select
.
2. To scroll through the options, press
Up
or
Down
.
3. To select the displayed number, press
Select
.
5. Power cycle the phone.
1. If the phones software needs to be updated the new software will now be downloaded
from the TFTP server. The status bar will increment fully across the display for each
function that is being performed in the download process.
2. Upon completion of the update process, the handset will re-boot with the new firmware.
6. The phone will ask for the extension and password. Enter the values required for the user on the
IP Office. Once these have been entered, the phone will register with IP Office. Note: The
password requested matches the IP Office user
Login Code
.
