Avaya 1616 User Manual Download Page 182

Page: 182 / 214

1608/1616 Phone User Guide

Page 182

15-601040 Issue 11c (Thursday, April 16, 2020)

IP Office

Comments on this document? [email protected]

While the phone is

locked

, the

Features

menu cannot be accessed to change user settings.

The system administrator is able to configure if you can access the

Membership

State

and

Fallback

options of a group. If you are not configured for any groups then the

Group

menu is not shown.

The system administrator is able to configure whether you can access the

Forward

and

Follow Me

and status options.

The

Park

menu and status options are only accessible while you are talking to a caller or already have

parked calls.

The

Account Code

menu is only accessible if the system has been configured with accounts codes.

The

Mobile Twinning

options are only shown if you have been configured to use mobile twinning.

The

System Admin

option is only shown if you have been configured as a 'System Phone' user.

118

Summary of Contents for 1616























































































































































































































Search results

Summary of Contents for 1616

Reviews:

Brands by name

Popular brands

Avaya 1616, User Manual

Search results

Summary of Contents for 1616

Reviews:

Brands by name

Popular brands