Avaya 1616 User Manual Download

Page: 92 / 214

1608/1616 Phone User Guide

Page 92

15-601040 Issue 11c (Thursday, April 16, 2020)

IP Office

Comments on this document? [email protected]

11.5 Adding a New Contact

So long as the telephone system capacity has not been reached, you can add up to 250 personal directory entries.

1. Access your personal directory contacts:

a. Press the

CONTACTS

key. The directory menu is displayed.

b. Use the left and right arrow keys to select your

Personal

directory.

2. Press the

New

soft key.

The menu now allows editing of the name and number. See

Entering C haracters

. Use the

up and

down

arrow keys to switch between number and name entry.

When the name has been entered as required, press the

soft key.

When the number has been are required, press the

Save

soft key.

To exit without making any changes, press the

Cancel

soft key.

Notes

1. If you have been configured as a system phone user by the system administrator, then you can also add,

edit, and delete some external directory contacts.

This only applies to external directory contacts entered locally into configuration of the system at which
you are logged in.

External directory contacts imported by the system cannot be edited.

However, if a local entry is created with the same name or number as an imported entry, the imported
entry is discarded in favor of the local one.

194

Summary of Contents for 1616























































































































































































































Search results

Summary of Contents for 1616

Reviews:

Related manuals for 1616

Brands by name

Popular brands

Avaya 1616, User Manual

Search results

Summary of Contents for 1616

Reviews:

Related manuals for 1616

Brands by name

Popular brands