Avaya 1616 User Manual Download

Page: 36 / 214

1608/1616 Phone User Guide

Page 36

15-601040 Issue 11c (Thursday, April 16, 2020)

IP Office

Comments on this document? [email protected]

3. Answering Calls

A slow flashing green lamp on an

appearance button indicates an alerting call. This may also be accompanied

ringing

and by the message lamp flashing.

Selected Button

If the button also has a red lamp (

) that indicates that it is already the selected button that will be used if you lift

the handset or go off hook in any other way. If that in the case you can answer the call in the following ways:

To answer a call on the selected button:

Red on, Slow green flash.

1. Select the method which you want to use to talk to the caller:

To silence the ringing, press the

double-arrow soft key and then press the

Ignore

soft key. The call

will still continue alerting visually and can be answered or ignored.

To redirect the call to voicemail, press the

double-arrow soft key and then press the

To VM

soft key.

To answer the call using the handset, lift the handset.

To answer the call handsfree, press the

SPEAKER

key.

To answer the call on a headset, press the

HEADSET

key.

Just pressing the

key will answer the call either on the speaker or headset depending on the phones

audio path

setting.

2. The green lamp will stop its slow flash. Once you have answered the call, you can switch between talk

modes:

To switch to using the handset, lift the handset.

To switch to handsfree, press the

SPEAKER

key. If you were using the handset you can now safely

replace it.

To switch to headset mode, press the

HEADSET

key. If you were using the handset you can now

safely replace it.

If you have answered the call on the speaker or headset, pressing the

SPEAKER

HEADSET

key again

before you select another mode will end the call.

Just pressing the

key or any other appearance button will put the call on hold.

142

Summary of Contents for 1616























































































































































































































Search results

Summary of Contents for 1616

Reviews:

Related manuals for 1616

Brands by name

Popular brands

Avaya 1616, User Manual

Search results

Summary of Contents for 1616

Reviews:

Related manuals for 1616

Brands by name

Popular brands