Avaya 1616 User Manual Download Page 111

Page: 111 / 214

1608/1616 Phone User Guide

Page 111

15-601040 Issue 11c (Thursday, April 16, 2020)

IP Office

Comments on this document? [email protected]

Voicemail: Voicemail On/Off

13.9 Transfer to Voicemail

When set to visual voice mode, the

key can be used to transfer your current call to the voicemail mailbox of

another user or group.

1. With the call connected, press the

key. You are still connected to the call and can continue talking.

2. Dial the extension number of the user or group to which you want to transfer the call.

3. When the number matches a user or group, their name is displayed.

To transfer the call to the user or group's mailbox, press the

Select

soft key. The caller will hear a few

seconds of ringing and then the mailbox greeting.

To exit the transfer menu, press the

Exit

soft key.

13.10 Send a Call to Voicemail

You can transfer a call targeted at you directly to voicemail.

To divert a call to your mailbox:

1. If the call is not the current call on the display, use the

up and down

arrow keys to scroll the display to

the alerting call.

2. Press the

double-arrow soft key.

3. Press the

To VM

soft key. The call is redirected to voicemail.

13.11 Visual Voice

This menu option provides an alternate route into visual voice if the

MESSAGES

key has not been setup to do

that.

1. Press the

Features

soft key if shown.

To access the menu during a call, press the right arrow key or press the

PHONE

key and then press

the

Features

soft key.

2. Use the

up and down

arrow keys to scroll the display to the option

Visual Voice

3. Press the

Select

soft key or the

button or the right arrow key.

4. Use the

up and down

arrow keys to scroll the menu to

Visual Voice

5. Press the

Select

soft key.

Depending on how your system is configured, you may be required to enter your voicemail password
and then press the

Done

soft key.

6. You will now see the

visual voice menu

Access Control

Your system administrator can configure whether you can access this menu option. See

Menu Access C ontrol

184

193

Summary of Contents for 1616























































































































































































































Search results

Summary of Contents for 1616

Reviews:

Brands by name

Popular brands

Avaya 1616, User Manual

Search results

Summary of Contents for 1616

Reviews:

Brands by name

Popular brands