U-3000 Reader
2011
12 |
P a g e
(
Where the “To” and “From” characters are numbers and the unit is in MHz. The Ratio characters are
numbers and the units are in Percent
)
2.
Use the
Left arrow key (*) or
Right arrow key (#) to move to the character you wish to change.
Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next
character. Press on the OK key to save the changes; a “Waiting” message will appear on-screen. Then a
“list 00/00” title will appear on the top of the screen.
SET POWER
The Set Power menu item allows the user to set the scanning power attenuation.
To change the Power setting, do the following:
1.
Press on the OK key when the Power option is highlighted. The power is displayed as follows:
- XX dB
(
Where the characters can range from 00 to 99 and the units are in decibels
)
2.
Use the
Left arrow key (*) or
Right arrow key (#) to move to the character you wish to change.
Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next
character. Press on the OK key to save the changes; a “Set successful” message will appear at the bottom
of the screen.
SENSITIVITY
The Sensitivity menu item allows the user to set the receiving sensitivity attenuation.
To change the Sensitivity setting, do the following:
1.
Press on the OK key when the Sensitivity option is highlighted. The power is displayed as follows:
- XX dB
(
Where the characters can range from 00 to 99 and the units are in decibels
)
2.
Use the
Left arrow key (*) or
Right arrow key (#) to move to the character you wish to change.
Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next
character. Press on the OK key to save the changes; a “Set successful” message will appear at the bottom
of the screen.
NET CONFIG
The Net Config option allows for configuration of the network settings for the unit.
To adjust the network settings for the unit, do the following:
