U-3000 Reader
2011
10 |
P a g e
1.
Press the OK key when the Manual option is highlighted
2.
Use the
up or
down arrow key to select an antenna port (RF-1, RF-2, RF-3, and RF-4). Then, press
the OK key to set the antenna port; the antenna port light will light up, indicating that it is ready to listen.
To set the unit to switch and listen at all four antenna ports, do the following:
1.
Press the OK key when the Automatic option is highlighted. The time format is as follows:
XXXX ms
(
Where the characters can be numbers and the units are in milliseconds
)
2.
Use the
Left arrow key (*) or
Right arrow key (#) to move to the character you wish to change.
Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next
character. Press on the OK key to save the changes.
DISPLAY TIME
The Display Time menu item allows for setting how long the LCD screen remains on.
To set the Display Time, do the following:
1.
Press the OK key when the Display Time option is highlighted. The time format is as follows:
XX sec
(
Where the characters can be numbers and the units are in seconds
)
2.
Use the
Left arrow key (*) or
Right arrow key (#) to move to the character you wish to change.
Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next
character. Press on the OK key to save the changes.
CLEAR FLASH
The Clear Flash menu item allows the user to delete all the data in the internal flash memory.
To clear the internal memory, do the following:
1.
Press the OK key when the Clear Flash option is highlighted. The following warning will appear:
CUATION
Data will be lost!
Are you sure?
2.
If you DO NOT wish to clear the internal flash memory, press the CL key to cancel the option. However, if
you wish to clear the internal flash memory, press the OK key to confirm the deletion of the flash
memory.
