VWC-44
51
connector. User can controller
AV-BOX
through Ethernet or WiFi via PC or mobile devices, such
as Smart Phone, iPhone and iPad. A webpage with keypad icons (virtual keypad) will be showed
in control devices for user to control all the OSD function of
AV-BOX
.
Additional built-in Ethernet Module is required.
User can use external Ethernet to RS232 conversion box to control
AV-BOX
through Ethernet.
User can use < > OSD direction keys to access the position for the modification and ˄ ˅ OSD
direction keys to change the value in the IP settings.
Ethernet Webpage (Virtual keypad in the screen):
If Ethernet Router supports PnP protocol, user can see
AV-BOX
device in the network. After
connection, it will show below content in the webpage. It includes virtual keys for the operation of
the OSD menu.
If user has Ethernet connection problem, please power ON/OFF
AV-BOX
or WiFi router again.
In [Ethernet] menu, there are two
alternatives:
DHCP IP & Static IP
DHCP IP is assigned by Ethernet router or
Ethernet switch hub.
Static IP can be programmed through OSD
keypad or remote controller.
