VWC-44
34
13.5.5 [Shift]: Edge blending area shift
13.5.6 [Color]: Individual projector white balance and color correction
The [Color] adjustment can be applied to individual projector for white balance and color difference
correction through separate RGB Gain and Offset adjustment. It will be very helpful in projector system
because projector may have color difference, lamp brightness decay and lamp replacement issue.
[Corner] can adjust the positions for black
level [Offset] borders through change the
end points of the borders.
Geometry alignment on the borders of
edge blending area should be very
accurate. Otherwise [Offset] position in
black level uplift will be affected.
User can adjust the top and bottom points
to get accurate positions.
[Shift] is to shift the whole edge blending area
to other location. The width of the edge
blending area will remain the same and only
change the position. This is to test the effect of
banding effect and select the best location of
the edge blending.
The maximum range for the adjustment is
250 pixels.
