VWC-44
36
b.
One PC can control two
VWC-44
output channels for two projectors. If more projectors are used,
user
can use multi-PC or finish two projector alignments first, freeze the grid pattern in the
projector, then
align the next two projectors.
c.
VWC-44
is connected with PC through Micro USB interface.
d.
Gwarp consists of two PC operation windows for channel A & channel B in one PC.
e.
After open Gwarp,
VWC-44
will be reset and controlled by Gwarp PC tool. If only one projector
needs
Gwarp alignment, user can activate OSD and access to 5x3 warp alignment in the channel
that user
doesn’t want to change, then it will show original manual alignment pattern for further
operation.
13.6.3 Gwarp operation: Only work with Windows 7 OS
13.6.3.1
System connection
Connect
VWC-44
and PC via Micro USB cable.
Unzip Gwarp file and install Nuvoton USB driver in PC with Windows 7 OS.
Check Device Manager to confirm correct USB driver installation.
Open [Gwarp.exe]. Click [Connect] to connect COM port. After connection, it will show input signal
resolution
and [Disconnect] icon. We propose to apply 1080p signal to
VWC-44
for easy system setup.
There are two operation windows for Channel A & Channel B control.
