VWC-44
17
OSD menu and operation
7 [Picture]--Color Adjustment
a.
The items under [Picture] menu will apply to both processing channels.
b.
This menu is only active under below conditions:
[Picture] menu will be grayed out and not functional when the color setting is in [Preset Mode]
under [Image Properties] menu. User needs to get into [Custom] menu and press [Save] menu to
activate [Picture] menu.
When the input signal is in YUV domain, all the items under menu are free to be accessed.
If the input signal is in RGB domain, only [Brightness] and [Contrast] can be adjusted.
c.
User can do further separate RGB individual color adjustment under [Image Properties] menu.
8
[Image Setup] for PC graphics from VGA input
a.
[Automatic]: It will do automatic image position alignment.
b.
[Manual]: manual setting for signal Phase and Clock to eliminate image noise in analog input
c.
[Horizontal Position]: to adjust the image horizontal position.
d.
[Vertical Position]: to adjust the image vertical position.
e.
When the input is VGA signal,
AV-BOX
will execute image position auto alignment. After this
process,
AV-BOX
will not do auto alignment again to avoid image shift unless VGA input is from
another PC.
Five items under [Picture] menu. All the
adjustments will be applied to both
processing channels.
Under [Edge Blend] menu, user can
adjust color in individual projector.
[Image Setup] menu can only be activated
when video signal input is from VGA analog
input port.
