R32
Split Type - Air Source Heat Pump 20220105
89
Date setting page display image:
/
Interface
Date
2.3.5.2 Time setting
On the HMI CONFIG setting page, by pressing the
【
up
】
or the
【
down
】
, the item indicated
by the arrow indicates the current selection, select "Clock", press the
【
OK
】
to enter the clock
setting page, and press the
【
left
】
or the
【
right
】
to change the selected item, press
【
up
】
or the
【
down
】
to modify the currently selected item.
After the modification is completed, press the
【
OK
】
to make the setting effective and return
to the clock setting page. During the modification, press the
【
Back
】
to return to the previous page,
and the modification will not take effect.
Clock setting page display image:
/
Interface
Clock
2.3.5.3 12 Hour system
On the HMI CONFIG setting page, by pressing the
【
up
】
or the
【
down
】
, the item indicated
by the arrow indicates the current selection, select the "12-hour clock", and press the
【
left
】
or the
【
right
】
to select enable or disable (default (Not enable), if you choose to enable, you can set the
current time through the main interface "AM" or "PM", and adjust the timing setting and the time
display of historical faults synchronously, such as:
