R32
Split Type - Air Source Heat Pump 20220105
84
Cancel
interface
Delete
interface
2.3.3.4 Add weekly schedule setting
In the booking and schedule setting interface By pressing the
【
up
】
or the
【
down
】
, the item
indicated by the arrow indicates the current selection, select "Add weekly schedule ", and press the
【
Menu/OK
】
to enter the add weekly schedule setting
The contents of the add weekly schedule setting interface are added to start time, end time,
timer working mode selection, water temperature setting and week setting
1. Start time, set the timer start time (default: 00:00);
2. End time, set the end time of the timer (default: 00:00);
3. Whether the air conditioning mode is enabled (not enabled by default);
4. Air conditioning mode selection, you can choose "heating" or "cooling" (heating by default);
5. Air conditioning water temperature setting, heating: 25-65°C (default 35°C); cooling: 5-25°C
(default 10°C);
6. Whether the hot water mode is enabled (not enabled by default);
7. DHW temperature setting,DHW: 30-60
℃
(default 55
℃
)
；
8. Weekly setting, "SUN, MON, TUE, WED, THU, FRI, SAT" means week options, select which
days of the week to enable the timer, select the corresponding week, the big box will be reversed,
and the box will be valid for that day , As shown in the figure below
。
After the weekly timing setting is completed. Save by pressing the
【
down
】
key, select
【
SAVE
】
press the
【
Menu/OK
】
to display a prompt interface, select
【
YES
】
and press the
【
Menu/OK
】
to
save the effect, and it will appear in the weekly timing setting interface, otherwise it will not take
effect, press
【
BACK
】
to return to the previous interface, the setting is complete
。
Weekly schedule setting is as shown below:
