R32
Split Type - Air Source Heat Pump 20220105
82
2.3.3.3 Weekly schedule
In the booking and schedule setting interface By pressing the
【
up
】
or the
【
down
】
, the item
indicated by the arrow indicates the current selection, select " Weekly schedule", and press the
【
Menu/OK
】
to enter the timer setting
You can switch between different timers by pressing the
【
up
】
or the
【
down
】
, and you can
set whether to enable the timer by pressing the
【
left
】
or the
【
right
】
(not enabled by default);
by pressing the
【
Menu/OK
】
to enter the corresponding timer page for setting, and the timer serial
number is displayed in the title line.
If there is no timer in the weekly schedule setting interface, the weekly schedule needs to be
added
The following figure is an example, which means that the currently selected timer is timer 1,
timer 1 is enabled, and other timers are invalid
The timer display page is as shown in the figure below
/
Interface
Weekly
schedule
The setting contents of the interface are timer serial number, timer start time setting, timer end
timer setting, timer working mode selection and weekly setting.
1. Serial number, the timer serial number can be up to 99 groups;
2. Start time, set the timer start time (default: 00:00);
3. End time, set the end time of the timer (default: 00:00);
4. Whether the air conditioning mode is enabled (not enabled by default);
5. Air conditioning mode selection, you can choose "heating" or "cooling" (heating by default);
6. Air conditioning water temperature setting, heating: 25-65°C (default 35°C); cooling: 5-25°C
(default 10°C);
7. Whether the DHW mode is enabled (not enabled by default);
8. DHW temperature setting,DHW: 30-60°C (default 55°C);
9.
Weekly setting, "SUN, MON, TUE, WED, THU, FRI, SAT" means week options, select which
days of the week to enable the timer, select the corresponding week, the big box will be reversed,
