SM4 Manual
by
MRM-Racing
V3.0
64
6. Select items to display on the graph (Space bar).
7. Set minimum and maximum graph or instrument ranges for graphing or virtual
drive (Press enter on selected item).
8. Set the line you want to graph to when graphing (Press enter on selected
item).
9. Sets the color for graphing (Press enter on selected item).
Keys: Enter = Set edit limits.
Space = Select item to graph.
10. To save changes press enter & select "Save new settings" item.
•
In virtual drive, "Space bar" graph select does not work. To graph an item
you create a strip chart.
•
Limits adjusted here has no effect on the "PC warnings & selection" menu.
Menu M0
User ID String
User ID string is shown on top of screen. This is saved inside ECU calibration program.
Store cal in ECU
Make changes permanent inside ECU. The F4 key is the shortcut to this feature.
•
If you have saved the calibration to disk before this, then can always load the
calibration back again.
Undo Store
Undo stores that have been performed.
When doing comparisons on different maps settings, tune then store, then tune new
values then store. You then can quickly jump between two settings by selecting each
store.
Undo Store shows which table was opened when store and the time stamp.
