Enabling
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 70
12.7 Enabling Fire Alarm Routing Equipment
When you enable
Fire Alarm Routing Equipment
(FARE), the output
which controls such equipment will be enabled. In the event of an
alarm, fire alarm signals may be sent to the fire brigade (configurable).
12.8 Enabling Outputs
When you enable outputs which control
Fire Protection Equipment
(FPE), in the event of an alarm, signals will be sent to trigger the
equipment. You can enable a single output, or all outputs in the
Operation Zone.
12.9 Enabling Fault Warning Routing Equipment
When you enable
Fault Warning Routing Equipment
(FWRE), the
output which controls such equipment will be enabled. In the event of a
fault, fault warning signals will be sent to, for example, the security
firm.
12.10 Enabling Immediate Output Actioning
When enabling
Immediate Output Actioning
, there will be no delay on
the actioning of outputs to Fire Alarm Devices (FAD) and/or Fire Alarm
Routing Equipment (FARE) in zones configured as
Delayed Action
Detection Zones
,
Delayed Coincidence Detection Zones
or
SOLAS
Detection Zones.
It is possible to enable immediate output actioning for
all Day / Night
areas
or for
selected Day / Night areas.
www.ukpanels.com
