The Operator Panel - Overview
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 7
2. The Operator Panel - Overview
2.1 Introduction
Each operator panel is assigned to one
Operation Zone
(refer to
«Zonal Definitions» in Appendix). Relative to its own zone, an operator
panel is
local
, while it is
remote
to operation zones which are not
encompassed by the local zone. All events and actions occurring in a
particular operation zone must be handled from a
local
operator panel.
The operator panel displays information on events occurring in all
operation zones. However, the type of events and the level of details of
the given information depends on which operation zone the
information is related to. Local panels will list all detection zones in fire
alarm state. Remote operator panels will list remote alarms only, and
function as «indication only» devices.
The operator panel consists of two main sections. The upper section,
and the lower section which is the
Operator Part
.
Power
Fire Brig. Signalled
Function Delayed
Function Disabled
0
ALARM
i
C
9
8
7
6
5
4
3
2
1
Mute Panel
Silence Alarms
Reset
More Events
Testing
Fire Brig. Disabled
System Fault
Alarms Disabled
Fire Brig. Fault
Fault
!
!
!
!
Alarms Fault
AUTROSAFE
SelfVerify
19:23
Figure 2-1: The Operator Panel
www.ukpanels.com
