© 2018 Autoslide Pty Ltd
MultiDrive
11
(b)
Cut the cover to the correct length
Steps
Cut the cover to a length
(L)
which is
0.51
” to 0.59”
(13 to 15 mm)
shorter
than the inside width (
W
) of the sliding door frame (see
Figure 5).
Cut off any pins or clips used to hold the cover during the coating
process.
Figure 6: Cut the cover (shown in grey) to a length
L
which is 0.51
” to
0.59
” (13-15 mm) shorter than
W
.
(c)
Cut the base to the same length
Cut the base to the
same length
L
as the cover (0.51
” to 0.59” or
13 to 15 mm shorter than
W
).
W
L
