English
www.auto-right.com
6
Steam Gun Operation
Rebuilding Steam Pressure While in Use
ON
TRIGGER
1
2
3
For continuous steam generation:
(A)
Press the red safety switch to the ON
position. Hold down the steam trigger.
The steam output is controlled through the
steam gun. The gun has both a steam trigger
and red safety switch.
For intermittent steam generation press the red
safety switch to the ON position. Pull the trigger
to release steam.
(B)
While holding down the trigger, press the
safety switch to LOCK. The trigger is now
locked into continuous steam mode.
To unlock from continuous steam mode, press
the red safety switch to the ON position.
WARNING:
Burns can occur from hot water or steam.
DO NOT touch the steam nozzle or attempt to
connect accessories while unit is in use.
NEVER direct the steam at a person, pet or
electrical device.
2
If the orange steam light comes on during use, it
indicates the machine needs to re-build pressure
in the tank.
Make sure the trigger on the steam gun is in
the open position and the switch is in the OFF
position. It should take approximately 40 seconds
to re-build pressure.
1
HAZARD:
HOT STEAM AND PARTS.
May cause injury, including skin burns
or property damage. Temperatures
exceed 212˚ F (100˚ C).
