Autonics KPN Series, User Manual For Communication

Page: 19 / 26

2 Modbus Mapping Table
© Copyright Reserved Autonics Co., Ltd. 19
No(Address) Type Set range Unit Factory default Note
OUT1
lamp
Control output1 display lamp 0: OFF 1: ON - - Bit 3
OUT2
lamp
Control output2 display lamp 0: OFF 1: ON - - Bit 4
AT lamp Auto-tuning RUNlamp 0: OFF 1: ON - - Bit 5
SV1 lamp Multi-SV1 lamp 0: OFF 1: ON - - Bit 6
SV2 lamp Multi-SV2 lamp 0: OFF 1: ON - - Bit 7
SV3 lamp Multi-SV3 lamp 0: OFF 1: ON - - Bit 8
AL1 lamp Alarm output1 display lamp 0: OFF 1: ON - - Bit 9
AL2 lamp Alarm output2 display lamp 0: OFF 1: ON - - Bit A
AL3 lamp Alarm output3 display lamp 0: OFF 1: ON - - Bit B
MAN
lamp
Manual control display lamp 0: OFF 1: ON - - Bit C
DI-1 input DI-1 input status 0: OFF 1: ON - - Bit D
DI-2 input DI-2 input status 0: OFF 1: ON - - Bit E
301008(03EF) - Heater current value monitoring 0.0 to 50.0 - -

Consists of the 31007(03EE) address bit data.
Bit F Bit E Bit D Bit C Bit B Bit A Bit 9 Bit 8
- DI-2 input DI-1 input MAN lamp AL3 lamp AL2 lamp AL1 lamp SV4 lamp
0 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1
1 Byte
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
SV3 lamp SV2 lamp AT lamp OUT2 lamp OUT1 lamp % lamp
℉ lamp ℃ lamp
0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1
1 Byte